Author: lucy.cowen

CARE POINT
Receiving Rubber from Nufox

This Care Point is to help identify the standard of extruded rubber supplied from Nufox and what is a pass or fail by visual inspection at the Goods Inwards stage.

Nufox deliveries to be prioritised to support manufacturing.
Basic checks to be actioned as per FMP 15 & QPD 52.
Nufox will include 2 sample sections of each length, these should be visually Inspected using the below guide to accept or reject
Any suspected rejected lengths should be communicated to Malini Nanavaty to check along with any queries?

What to look for…….
Small air holes in the rubber or “Porosity”, using an inspection lamp for a detailed view of the section.

Reject

Reject

Pass

Holes clearly visible with naked eye

CARE POINT

Holes visible with inspection lamp

No visible holes using inspection lamp

23/02/2015